energy saving 120V 60Hz wind turbine Micro Grid Tie Inverter 300 Watt SW300 manufacturer from China Wenzhou Sunuse Electric Technology Co., Ltd

energy saving 120V 60Hz wind turbine Micro Grid Tie Inverter 300 Watt

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: SW300

<span style="fo

energy saving wind turbine micro inverters for sale with Anti-Islanding Protect

Application:

SWI Series Adopt precise vector wind speed automatic control function. In different wind speeds, the output voltage of wind power generator is different. It means the output voltage is not stable in the long run. It's very hard to control working condition in the steady state whether for the battery control or inverter system. Because of the unsteady voltage of the wind turbine, the inverter using load for automatic control wind power generator speed, at high speed, load increasing, at low speed, load corresponding reducing. It could make the wind power generator in a constant speed state and control the output voltage at stability of wind power generator. In the same time it could make the wind generator power of all the output to the load! Then greatly improve the efficiency of wind power and its utilization rate of increase! The experiment shows that this system could make the utilization rate of wind power up by more than 40%. And do not need to connect battery.

Parameter Table:

models	SWI300-230V/50Hz/120V/60Hz
Recommend using wind generators	300KW
DC MAXinput current	13A
AC MAXoutput power	300Watt
DC MAX Open-circuit input-voltage	40VDC
DC input voltage range	15~30VDC or 24-30VDC
MAX output power factor	0.99
DC input Reverse voltage protection	FUSE
AC output voltage range	(120V versions 90~160VAC)(230V versions 190~260VAC)
AC frequency range	48~63Hz
Output current total harmonic distortion	THDIAC <5%
AC Phase	<0.5%
Islanding protection	VACf AC
Output short circuit protection	Current-limiting
Show	LED mode power instruction voltage instruction AC frequency instruction over-voltage instruction
Communication way	60KHz modulation,power line carrier-current communication
Standby Power	<1W
Night Power	<1W
Ambient temperature range	-25 ~60
Humidity	0~99%(Indoor Type Design)
Waterproof	Indoor Type Design
Electromagnetic Compatibility	EN50081.part1 EN50082.part1
Power System Disturbance	EN61000-3-2 EN62109
Network test	DIN VDE 1026 UL1741
Certificate	CE

System Function :

1.AC 0 angle with high precision auto-detection

AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.

AC phase shift: < 1%
Over-zero protection: 0.2 VAC
AC switching: 50Hz / 60Hz

2. Synchronous High-frequency Modulation

In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.

1) Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz)

2) Synthetic way: MOSFET full-bridge

3) High frequency: 50KHz

3.Pure Sine Wave Output

Use SPWM directly to make pure sine wave outpu

1) Output waveform: Adopt complementary PWM to push-pull pure sine wave.

2) Generate means: enhancement-mode SPWM

4.Automatically Adapt To Different Load Power Factor

Adapt to any of the power load