Aluminium Alloy Shell Enphase Micro Grid Tie Inverter 600W With Full Load And MPPT
 

Specifications

Input /output is fully isolated to protect the electrical safety
Multiple parallel stacking
Simplify maintenance
Operation
 
Parameter Table:

 
Features:
 
1. Perfect Pure Sine Wave Output Form 
2. High utilization of solar energy by using MPPT (Maximum Power Point Tracking) technology 
3. Perfect protection functions 
4. Protection of wrong polarity connection to avoid the damages by incorrect operation Full power output under harsh circumstance  
5. Stackable (connect in parallel for higher output)
6. Simple and safe installation  
 
Application:
 
1. It is a key device of power generation system such as PV power generation system, small power wind power generation system.
2. Smart Micro inverter optimized design for modularization modular power generation systems.
3.They can be use with DC power supplies such as the mainstream solar modules, 18V, 24V and 36V monocrystal and/or Polycrystalline solar panels, small power wind generator as well as battery for converting into alternating current which suitable for feeding into utility grid.
 
4. Product is stable and reliable as well as high conversion efficiency. It is best choice for PV power generation systems and small power wind power generation systems
 
 

 
 

 

 
Trouble removal:
 
1)Red LED shows:
A) Check if the input voltage to inverter is low than 10.5V or higher than 28V.
B) Check it the AC cable connect to utility power correct or the utility power is disconnect.
2)No LED shows:
A,Check if the DC input voltage is in too low.
B,Check if the DC fuse is broken.
 
LED Indicator   
                                       
A,Red LED:
1,Low-voltage protection (input DC voltage is less than 10.5VDC).
2,Over-voltage protection (Input DC voltage is greater than 28.5VDC).
3,Over-temperature protection (when the chassis temperature is above 75,

the temperature dropped about 2-10 minutes to restart automatically after cooling).
4,Fault Protection (when 110VAC or 220VAC power outage or shutdown).
5,Islanding protection: When the electric supply stop, the inverter automatically shut down output.
 
B,Green LED:
1,Green LED flashing: The inverter is adjusting power output. MPPT is in working condition.
2,Green LED long in time: The inverter is in working condition with the maximum output power
 
 
FAQ:
Question 1: Do I Need A Power Inverter?
Answer: Actually, no. This is the only component of a solar energy system that is not absolutely required. However, if you don't use one, you will not have 120 volts AC and will have use battery power alone. This might be acceptable in a small RV or cabin, but most people want to use normal AC appliances
 
Question 2: How to install a Grid Tie Inverter?
Answer:
Red terminal: Connect DC positive, black terminal: Connect DC negative.
AC socket:  Connect to the mains. Put the side of the AC cord which has holes into the inverter with 3 foot outlet and the other side of the AC cord to home AC outlet.
 
Question 3: How to select a suitable Grid Tie Inverter ?
Answer: Before you inquiry, pls provide us the information as below:

1. Where do u use for? Working with solar panel, wind generator or battery?
2. Pls let us know your DC Power supply parameter. Such solar panel's Voc and Vmp.